Making Your Own Replacement Key For Saab 93 Viggen
Saab owners who lose a key may worry about the cost and inconvenience of replacing it. Fortunately, there is a way to save the cost by creating your own key fob.
You will need a flathead phillips screwdriver to accomplish this. Insert the flathead screwdriver in the slot located at the middle of the case and then slowly open it.
Cost
Most SAABs have two keys when new, but some used vehicles only have one. In this instance the owner will need to purchase a new key, and it could be costly. There are a lot of ways to save money during this procedure. If you only need to replace the key fob case and not the badge or emergency key, you can save some money by buying a used case from an auto dealer. These cases do not contain the emergency badge or key, and are prone to wear out fast.
In addition to the cost of a brand new key, you also have to pay for the installation and programming of the TWICE module. These costs can quickly add up particularly if you don't have an extra.
For this reason, it is essential that you always have two keys to your car. If you lose only one key, you will not be in a position to get transportation.
It's not as hard as it may seem to add an additional Saab 9-3 key. The only issue is that you have to connect the key to the car's computers. This can be accomplished by a dealer, however it can take a while to set up an appointment. You can find all the details you need on the internet to help you through the procedure.
Installation
The majority of Saab cars manufactured after 1995 have a special immobilizer system that makes use of keys to control the car's engine. The system also controls door locks as well as remote functions of the vehicle. It is important to have a spare key in order to avoid losing the original one and having your car stolen. The good news is that in the event you lose your sole working Saab key you can replace it without the need to pay for an expensive dealer service.
First, you need to prepare the new keyfob. This can be done by using the flathead screwdriver for prying the case open. Insert the screwdriver into the small hole in the middle of the case and gently work the screwdriver. If you're having trouble, try using different angles. Once you've opened the case, you can take out the electronics and place them in a fresh fob case.
Once you have the replacement fob and the key, you are able to begin the programing process. You will have to connect your Tech2 and follow the directions for the NG 9-3 (with or without a key). It is advised to get a replacement device TWICE, which is connected to the correct transponder and key. You can find this unit on the internet. But, you must make sure that it is an OEM replacement.
Programming
Tech 2 Tech 2 is required to add an extra key to a Saab 9-3. It also requires programming the vehicle to recognize the new key. This is a far more complex procedure than simply copying a key made of metal. It must be done by a professional to avoid damaging the electronic system of the vehicle. It's best to add a spare car key as soon as you can. If you delay, it could cost an additional amount in the future.
It is also necessary to replace either the TWICE or CIM modules. This is usually a mail-order process and isn't something you can do by contacting an aftermarket retailer. Depending on the model of your car it could cost quite expensive.
There's a solution to the dealer who is charging you top dollar to replace your car computer. S.A. Locksmith & Security can reprogram the EEPROM of your Saab computer and prepare your vehicle for the new key, thereby saving you the cost of a brand-new car computer! This service is quick, affordable and easy. It could save you 50percent or more compared to what a dealer would charge you! This is a great solution for those who have lost their car keys.
Remotes
The Saab 9-3 Viggen is one of the most distinctive cars ever to sport the Saab badge. It was a Scandinavian front-drive, fighter jet-inspired machine that was fast as a nut and enjoyable to drive. While a variety of other Saab models were built after it, they were not as distinctive.
It's important that you change your Saab 9-3 key fob in the event that you lose it. Contrary to the more popular European hot hatchbacks, Saab vehicles come with an immobilizer system that requires a specific key to start. If you have a spare, the replacement process is fairly simple. If, however, you do not have one it can be costly and time-consuming.
You could save money if purchase an old key fob replacement and have it programmed locally by locksmiths. Be cautious when buying used keys from eBay or other online retailers. They might not be genuine, and you could end with a higher cost in the long run.
Removing the electronics and battery from the old key fob is a straightforward procedure that anyone can perform using a screwdriver with a small flathead. Be careful not to cause damage to the small electronic components within the case. Be careful not to pour liquids into the case, as this could cause damage. saab replacement keys is also recommended to avoid buying duplicate keys from aftermarket sellers, as they may not have been linked to the CIM of the car you own.